Patches are a rewarding product: small, quick to stitch, easy to stock and versatile, from club crests to name badges. There are three proven ways to a finished patch.
Method 1: patch on fabric
Hoop the base fabric with backing, stitch border and fill, cut out. The easiest way to start, ideal for small runs.
Method 2: patch on film
The outline is stitched on a film, a pre-cut blank is placed, then border and fill follow. The patch releases cleanly from the film with little finishing work.
Method 3: patch with merrowed edge
Stitch on fabric, cut out and overlock the edge on a merrow machine. This gives the classic look for simple shapes such as circles, ovals and crests.
Materials
• Base fabric: firm twill or felt, it gives clean edges
• Thread: polyester, weight 40, strong and wash resistant
• Needle: size 75 with a sharp point
• Backing as needed, heat-seal film or hook and loop for the back
• For cutting: scissors, hot knife or laser
What matters in the design
• Stitch the outline first, it fixes the material
• Satin border about 3 to 5 mm wide so it covers the cut edge
• Round the corners, sharp corners fray sooner
• Bold areas instead of fine details
Common mistakes
The edge frays. The border is too narrow or the fabric too open. Widen the border, choose a denser fabric.
Backing shows. Cut closer to the border.
The heat-seal film does not hold. Pressed too briefly or too cold. Follow the manufacturer's values.
Video course
The course Patches Made Easy shows all three methods in five videos (19 euros).
Method 1: patch on fabric
Hoop the base fabric with backing, stitch border and fill, cut out. The easiest way to start, ideal for small runs.
Method 2: patch on film
The outline is stitched on a film, a pre-cut blank is placed, then border and fill follow. The patch releases cleanly from the film with little finishing work.
Method 3: patch with merrowed edge
Stitch on fabric, cut out and overlock the edge on a merrow machine. This gives the classic look for simple shapes such as circles, ovals and crests.
Materials
• Base fabric: firm twill or felt, it gives clean edges
• Thread: polyester, weight 40, strong and wash resistant
• Needle: size 75 with a sharp point
• Backing as needed, heat-seal film or hook and loop for the back
• For cutting: scissors, hot knife or laser
What matters in the design
• Stitch the outline first, it fixes the material
• Satin border about 3 to 5 mm wide so it covers the cut edge
• Round the corners, sharp corners fray sooner
• Bold areas instead of fine details
Common mistakes
The edge frays. The border is too narrow or the fabric too open. Widen the border, choose a denser fabric.
Backing shows. Cut closer to the border.
The heat-seal film does not hold. Pressed too briefly or too cold. Follow the manufacturer's values.
Video course
The course Patches Made Easy shows all three methods in five videos (19 euros).
